Tips,Tricks, Procedures and Best Practices

This forum consists of tips and instructions for various AGi32 capabilities.

Importing existing luminaire definitions into a new file
Here's a quick way to import existing luminaire definitions into a new file: Import the existing AGi32 file via the File-Import-AGI File command I...
Tue, 24 Jan, 2017 at 1:43 PM
How to reset/delete all of the AGi32 settings stored in the registry
Under certain circumstances, it may be necessary to reset/delete all of the AGi32 settings stored in the registry (e.g. after changing Regional Settings). P...
Wed, 22 Mar, 2017 at 11:46 AM
AGi32 System Requirements
AGi32 is a state of the art illumination engineering program. It will run satisfactorily on even legacy hardware for relatively simple applications. Users p...
Thu, 8 Feb, 2018 at 9:33 AM
Roadway Standard Configuration Tool
There are a number of unique calculations associated with each international roadway standard (North American IES-RP-8-2000, British BSEN 13201-3.2003, Euro...
Thu, 15 Feb, 2018 at 2:30 PM
Using Roadway Optimizer
The Roadway Optimizer for AGi32 is essentially a complete roadway design program in its own right. The Roadway Optimizer has the ability to predict pole ...
Thu, 15 Feb, 2018 at 2:52 PM
Using the Calculation Points – Roadway command
The Calculation Points – Roadway command is available from within the main Model Mode environment of AGi32. Similar to the Roadway Optimizer, it performs ca...
Thu, 15 Feb, 2018 at 3:12 PM
Consider Obstructions in Roadway Calculations
AGi32 allows 3-dimensional obstructions or reflecting surfaces to be considered in roadway calculations. This is not simply illuminance, but all roadway met...
Thu, 15 Feb, 2018 at 3:26 PM
Obtrusive Light Primer
Evaluate the obtrusive light produced by our fictitious fast food environment BurgerWorld2. Consider the following: Areas of concern: 50ft. perimeter ...
Thu, 15 Feb, 2018 at 3:48 PM
Mesopic exterior lighting calculations per IES TM-12-12
Watch the video Human visual performance in low-light environments has been shown to improve under whiter light sources (those with S/P Ratio > 1...
Thu, 15 Feb, 2018 at 4:18 PM
Calculate PPFD for Horticulture
AGi32 Calculates Photosynthetic Active Radiation (PAR) for Horticultural Applications  Lighting for plants is different from lighting for humans. Light en...
Thu, 15 Feb, 2018 at 4:48 PM