Occasionally you may see a popup like this when trying to Activate a subscription:
Even though this message is a bit cryptic there is something about this message that tells us what is going on. This message is 1 out of 4 similar messages that will popup when something went wrong with the License Manager (LM).
So, what can you do about these errors? Well, generally these errors occur because a Firewall is preventing 443 traffic or in a broader sense, your LAN/WAN configuration is not allowing 443 traffic. There is a difference but they both have the same result, the program (e.g. AGi32) cannot connect to the LS or the Instabase.
We have devised a simple test to see if the connectivity issues you are having are on our end. To run the test, open a browser window and go here, or click this link:
Then locate your license file and drag and drop it into the drop area on the web page you just opened up. Your license file will be located in this folder, C:\ProgramData\Lighting Analysts\Subscription\License and it will end in the .lic extension. You should see an output like this:
Test 1 is essentially errors 1 and 3 combined. Test 2 checks to make sure the license file is not corrupt or formatted incorrectly. Test 3 sends a small packet to the LS to verify the license file.
It is possible that this web test works when the program doesn't and that would indicate that more than likely your Firewall or Network is preventing the program from using Port 443. If this test fails then either your Network is having issues, or in fact our LS is down, and if that is the case, then Test 1 above will fail.
For additional information on Firewalls and using port 443 see this KB titled: Unable to connect to license server
Please note that we are unable to aid in Firewall or Network connectivity issues but we hope this test will help you to isolate the problem.
The Lighting Analysts Team